Students examine different types of soil that have been mixed with water and allowed to settle. Next, they work with a soil model to investigate its components (sand, silt, and clay) and learn how the properties of these components affect the passage or retention of water through the soil and the amount of air in the soil. Grades 9-12

infiltration: to pass through a substance by filtering or permeating

loam: ideal garden soil that has a well-balanced mixture of sand, silt, and clay

percolation: the movement of water within and through the soil

permeability: the ability of soil to allow the passage of water

porosity: the percentage of soil volume that is not occupied by solids

1. To engage students in the lesson, prepare a soil separation demonstration for them to observe. At least 1 day before class, do the following:
   1. Obtain 2, clear plastic bottles (12–20-oz water or soda bottles) work well.
   2. Fill one bottle about 2/3 full of potting soil.
   3. Fill the other bottle 2/3 full of local soil.
   4. Add water to near the top of each bottle.
   5. Place caps on the bottles and shake the contents well.
   6. Place the bottles in a location where they will not be disturbed.
2. At the beginning of class, remind students that essential plant elements are found in soil. Ask, “What is soil?” Write students’ responses on the board or chart paper. Accept all answers. Student responses may include ideas about soil containing rocks, sand, clay, insects, worms, bacteria, bits of wood, and water. If necessary, point out that these materials contain many of the essential elements.
3. Ask students, “How would you categorize the components of soil?” Student responses will vary. Guide the discussion to bring out the fact that soil consists of nonliving inorganic material such as clay, silt, and sand as well as living and nonliving organic material such as dead plant material, bacteria, insects, and worms.
4. Ask students, “How does soil help plants to grow?” Write student responses on the board. Student responses will vary. Guide the discussion to bring out the following:
   • Soil provides support for plants’ root systems.
   • Soil provides essential nutrients.
   • Soil holds water and makes it accessible to plants.
   • Soil contains air spaces, which is necessary for plant growth.
5. Being careful not to shake or disturb the bottles, show the class the bottles of potting soil and local soil that were previously mixed with water and allowed to settle. Explain how they were prepared. Ask students to gather around the bottles and make observations about the different soils. Students will observe that the different soils separate differently. At this point, students will not know what is found in each layer. They should record their observations and refer back to them later in the lesson.
   • The potting soil will show a thick layer of dark material on the bottom, a thick layer of cloudy water, and a thinner layer of organic material on the top.
   • Local soils may differ, but a typical soil will show layering similar to potting soil though there may be less organic material floating on the surface.
6. Remind students that soil contains both organic and inorganic material. Ask, “Can you identify the organic material in each container?” Responses will vary. If necessary, explain that the organic material is less dense than the inorganic material and floats on the surface of the water. If students are unfamiliar with the term “organic,” explain that organic material includes decayed matter from plants, animals, and insects.

Activity 1: Soil Columns

Students will learn how the composition of soil affects the percolation of water by setting up columns using sand and baby powder (to represent silt). The teacher will demonstrate the clay column.

Procedures:

1. Prior to class, prepare one or more clay columns for a class demonstration.
2. Explain to students that the major components of soil (in addition to the organic matter) are sand, silt, and clay. Inform students that they are going to be investigating these soil components and thinking about how they affect the properties of the soil.
3. Ask students to work in teams of 3. Give each team 1 copy of the Water and Soil Properties handout (Masters 2.1 - 2.4). Briefly review the instructions with the students. Point out the second page of their handout titled, Column Setup, and tell students that this diagram illustrates how they will set up their soil columns. Inform students that they will be using baby powder as a substitute for silt. Make sure that students understand the procedure they should follow. Unlike clay or sand, it is difficult to obtain silt. As students will later learn, baby powder particles are about the same size as silt, making an appropriate substitution.
4. Hold up a straw that is set up according to the same instructions but contains clay rather than sand or baby powder. Demonstrate adding water and beginning to time the process. The water will take quite a while to move through the clay. However, record the start time and allow students to watch for a few seconds before they move on. Make sure they understand that water will move more quickly through the other substances so they need to make sure that they pay attention when they start their experiments. Watch the clay column periodically to monitor the movement of water. Watch more closely when the water nears the bottom of the column so that you can record a finish time.
   • Teacher Tip: As described in step 1, it is recommended to have more than one clay column for students to observe. Start them several hours before class starts. Record the start time for each column.
5. Allow time for teams to work through their experiments. As teams work, circulate around the room to answer questions or to help resolve any difficulties that may arise.
   • Teacher Tip: Students may feel that it is difficult to determine when all the water has moved through the column. For baby powder and clay, for example, water may collect at the bottom of the straw but not drip for up to several minutes. The important thing is for students to be consistent. For example, if drops have been falling at approximately 4-minute intervals and then nothing drips for about 10 minutes, students could use the time of the last drop as a cut-off point. As an alternative, to gauge how long it takes the water to move through the column, you could have students note the time at which they cannot see any water remaining at the top of the column. If you take this approach, ask all members of the class to use this same strategy in their measurements. Although this measurement may provide interesting data, if students find it difficult, they can skip this data and focus on the other categories of data collection.
6. After teams complete their investigations, make sure that each team adds their data to the class chart. Calculate the averages of the class data for time and water volume. Add data for the clay component as well.
   • Students can work individually or in teams to calculate the averages.
   • The data in Table 2.1 was collected during pilot testing of this lesson plan. You can use the data for the clay component for your class to analyze. The other data may provide interesting comparisons for your class data. It is important to note, however, that your data may be different because of differences between the straws, type of sand, and so forth. 
7. Have students turn to the third page in their handout titled, Making Sense of the Data. Allow time for students to work in their teams to answer the questions. 
8. Continue the discussion by asking students why they think particle size would change the way that water moves through soil or the amount of water retained in the soil. Student responses may vary. This is an opportunity to gauge student’s current thinking.
9. To illustrate the relationship between surface area and particle size, work through an example with students about the surface area of a cube.
   • Calculating surface area of a cube is simpler than calculating surface area of a sphere, but the basic principle is the same.
   • Draw a cube on the board and indicate that each side is 10 cm long. The surface area of the cube is calculated using the formula
   • Surface area = length x width x number of sides. For a cube that is 10 cm square , the surface area would be 10 x 10 x 6 = 600 cm²
   • Now imagine that the same cube was cut into 8 smaller cubes (same total volume). Each cube would have sides 5 cm in length. The surface area of each small cube would be 5 x 5 x 6 = 150 cm². However, when you calculate the total surface area for all 8 smaller cubes, you have a surface area equal to 150 x 8 = 1200 cm². This means that the surface area to volume ratio increases as the size of the cube (or other particle) decreases.
   • Similar to cubes, a collection of smaller spheres would have a greater total surface area than a single large sphere.However, calculating the surface area of a cube is easier than calculating the surface area of a sphere. (Surface area of sphere = 4πr².)
   • Students may have considered other examples of surface area related to other areas of science. For example, students may have thought about why single-celled organisms are small and why large organisms are multicellular. In large part, this is due to issues related to surface area. Large organisms must be multicellular (made up of many small cells) because very large cells would not have adequate surface area for processes such as gas exchange, and so forth.
10. Help students continue to build their understanding by summarizing what they know so far. From their experiments, they learned that particle size was important for issues related to water movement and retention in soil components . They also now know that there is a relationship between particle size and surface area. Display a copy of Particle Size, Surface Area, and Water Movement. As a class, work together to indicate the relationships between these factors.
11. Now that students understand the relationship between particle size, surface area, and water movement in the soil components, explain that a key factor in the movement of water through soil is friction. The force of gravity pulls the water downward, but the friction, which is related to surface area, causes resistance. Therefore, water moves more slowly through soils with smaller particle sizes (silt or clay).

Activity 2: Soil Is Complex

Students consider how soil is usually a mixture of the three major components (sand, silt, and clay) and the amounts of each component influences plant growth.

1. Remind the students of the ways in which soil helps plants to grow.
   • Soil provides support for plants’ root systems.
   • Soil provides essential nutrients.
   • Soil holds water and makes it accessible to plants.
   • Soil contains air spaces, which are necessary for plant growth.
2. Ask, “Based on what you learned about soil components (sand, silt, and clay), would any of these be ideal for helping plants grow?”
   • This is an opportunity to assess what students remember from the previous activity. Students’ responses should indicate that some soil components (e.g., sand) do not hold as much water, which could be detrimental to plants. On the other hand, clay does not let water move through very quickly which could also be a problem if there is too much water in the soil for healthy plants. In addition, clay (once it is wet) does not contain much air space, which also could be problematic for plants; sand contains a great deal of air space, which in extreme cases could mean that there is not enough support for a plant’s roots.
3. Explain that soils are not as simple as the individual components they used in their investigation. Soils are made up of a mixture of sand, silt, clay, as well as organic matter. Display a copy of Master 2.5, The Soil Triangle. Explain that it is used to classify the different types of soil. Point out that the soil triangle diagram is divided into 12 soil classifications based on the amount of sand, silt , and clay in the soil.
   • You may want to point out the term “loam” to students. Loam is another word for a soil that includes an ideal mix of sand, silt, and/or clay for many crop plants. On the soil triangle, there are 12 categories of loam that are differentiated by the amount of each component the soil includes.
4. Help the students learn to use the soil triangle by giving them a hypothetical soil to classify. Ask, “How would you classify a soil that contains 20 percent clay, 70 percent silt , and 10 percent sand. Demonstrate on the projected copy of Master 2.5 how students would determine that this soil sample would fall into the silt loam classification.
   • Start by finding 20 percent clay on the left side and drawing a line horizontally across the triangle. Then find 70 percent silt on the right side of the triangle and draw a line for that percentage. Finally, draw a line for 10 percent sand from the bottom of the triangle. The intersection of these 3 lines will determine the soil classification.
5. Ask, “In which category on the soil triangle do you think CROP plants would grow best and why?” Allow volunteers to share their answers but make sure they support their answers with information about soil properties that they learned previously.
   • Answers will vary with respect to the specific type of loam that would be best, but they should include ideas that reflect what they have learned about water movement through soil, water retention, and air space. For example, an appropriate response might be “Soil with some sand would allow water to move through the soil and it would have more air space than clay or silt, but having some clay or silt would help the soil retain some water and provide more structure for the roots.” Students may realize that plants living in different environments or types of soil have different root structures.
6. Conclude the activity by asking students how the soil triangle could be helpful to someone who is growing plants (either on a small scale such as an individual gardener or on a larger scale such as a farmer).
   • If students have difficulty getting started, you might ask them to think about the situation of someone who wants to grow a plant in their garden but the plant does not do well because the soil is very hard and compacted. What does this mean about the soil and how might it be changed? Another situation relates to irrigation. In one location, a crop may need a certain amount of water to thrive. In a different location, irrigating with the same amount of water may be either insufficient or excessive because the properties of the soil are different.
   • If you wish, this could be assigned for homework to allow students to do more research about situations in which knowledge of soil properties and the soil triangle may be beneficial.

After conducting these activities, review and summarize the following key concepts:

• Soils vary in composition.
• Particle size in soil is critical to the movement of water and nutrients through soil. The smaller the particle size, the slower the movement of water and nutrients.

• Nutrients for Life Foundation
• BSCS-Biological Science Curriculum Study
• Reviewed by Smithsonian Institution

• Dirt-to-Dinner: Food Matters
• Living Soil Film
• Nutrients for Life eLessons
• Soil Health Education Resources
• Soil Life
• Soil Science Society of America
• Soil Science Videos
• Soil, Not Dirt
• Using Technology to Save Water
• Web Soil Survey